Full-auto PC extrusion blow moulding machine

查看分类
Full-auto PC extrusion blow moulding machine

Full-auto PC extrusion blow moulding machine

SPECIFICATION:

JYX-80PC Automatic Extrusion Blow Molding Machine is hydraulic, automatic hollow plastic molding machine with accumulator die head and the die head adopts German technology. It is special for producing 5 gallon PC water barrel. The transparence of PC 5 gallon bottle is very good. This machine is widely used in such fields: chemical industry, petroleum, medicine, commodity, cosmetic, foods, lighting, tool, auto, motorcycle, shoemaking, toys and so on.

It can produce plastic bucket, chemical drum, auto parts (water box, oil box, air-condition wind pipeline and empennage), tool boxes and bags, dust collector tube, chairs for bus and gymnasium, etc. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble shooting, maintenance and other benefit.

TECHNICAL PARAMETERS:
Model
JYX-80PC
Suitable Materials
PC
  • Real Output
  • When PC 5gallon water barrel 720g
  • 1500-1900 pcs/day
  • PC 5 gallon barrel weight
  • Suitable use as standard
  • 600-850g(adjusted by controller)
  • Product Volume
  • 1cavity
  • 5gallon
  • Extrusion Unit
  • Screw Diameter Screw L/D Ratio Screw Speed Plasticizing Capacity Number of Heating Zone on Screw
  • 80mm22:1L/D 40r/min 90kg/hr 4
  • Die Head Unit
  • Amount of die head Volume of Storage Jar PC storage capacity Die-pin Diameter Number of Heating Zone
  • 14L 2kg 80MM 4
  • Clamping Unit
  • Work Station Amount Mold Board Amount Mold Board Size Clamping Force
  • 14 700*700*66mm 180KN
  • Mould Unit
  • Cavity amount Max Mold Size
  • 1 Cav700*500*500
  • Lifter Unit
  • Turbine reducer lifter
  • 4 pieces
  • Power Unit
  • Electrical Source Screw Motor Power Clamping hydraulic motor Servo hydraulic motor Screw heating power Die head heating power Hopper dryer power Fan power(4pcs) Total Power Fact consumption power
  • 220/380V,3phase 50/60Hz 30kw 7.5kw 4kw 10kw 5kw 4.5kw 0.12*4=0.48kw 58kw 20kw/h(tested)
Waterhead
Water pool
Air Supplier Pressure
0.8Mpa
Air consumption
0.5m3 / min
Size of main machine
3910*2060*3190mm
Weight of main machine
9000kg
  • Auxiliary Equipments
  • Low Pressure Air Compressor  1 Set Air Tank  1 Set Oil/water automatic mold temperature controller 1 Set These 3 auxiliary equipments is enough, no need other equipments.
  • 0.8m3 /min; 1.25mpa;7.5kw;0.32m30.42m3 / 0.8Mpa Heating power 4.5kw;motor power 0.5kw 0

上一条:

下一条:

微信扫码咨询